147FMF, 1P47FMF, 152FMH, 1P52FMH, 1P52FMF, 1P52FMI-H (107 electric start), ZS147FMF-A

Inside diameter of the hole in the head = 63mm

72mm diameter OD

Lifan 147FMF 152FMH 1P52FMH 1P47FMF 1P52FMF 154FMI-2

To use with 5 coils

Can't works in place of flywheel with a round sensor

With round bump sensor

Use only with the stators 2 coils

Is not appropriate for the stators 6 coils usded on the 140 Lifan and on most of Lifan engine since 2009

-

Sold only in kit 2 cup + 4 half moons

Not suitbalbe on YX150/160/170 and GPX150/160

Bore 52.4mm, 1mm thick
To pitch studs cylinder engine and Honda CRF50 Chinese engine 107, 110

Engine assignment:

For the horizontal cylinder engines (except YX150-1P60FMJ) is the wheel that is on the tensioner arm in the crankcase.

shaft 11 mm

outer diameter 45/6mm

An attached aluminum one for the drain plug and one screw tensioner chain.
Diameter 12 mm and 14
It changes every disassembly.
rn

The same as the NGK brand without ...

Inside diameter 60mm

Crankshaft bearing -20x52x15-

Inside diameter 26mm carburetor for all 18 and 22mm dimension of the venturi

WEDGE 25X14X4 mm diam
Mounts on any pitbike engine cylinder horizontal

height 5.50mm for valve tail diameter 5 mm

Any horizontal except 150/160 YX-GPX engine

Joint spy out clubbing all the engines shaft  17 mm, dimensions: 17x29x5

Chain links 90 Genuine Honda
Assignment: Lifan motors 125-1P54FMI and 1P52FMI
rn

Common to all engines and includes the deck seal plugs and 2 small rings, which are at the screw behind the plate.
While taking soint refitting not to pinch the seam.

double lip 18.9x30x5

Diameter of the valve stem 5mm
For Lifan engines, Ducar, Loncin, Jialing, Jongsheng 2 valves

48mm pitch

Lifan 147FMF 152FMH 1P52FMH 1P47FMF 1P52FMF 154FMI-2

-

45mm pitch

Attention is not suitable for engines from 88 to 110cm3

Attention is not suitable for engines from 88 to 110cm3

An attached aluminum one for the drain plug and one screw tensioner chain.
Diameter 12 mm and 14
It changes every disassembly.
rn

r