147FMF, 1P47FMF, 152FMH, 1P52FMH, 1P52FMF, 1P52FMI-K (107 with 125 crankshaft), 1P52FMI-H (107 electric start) Ref : 3398 Not Available 89,00 €
Slow jet KEP... and main KEC...
The foam air filter diameter 44mm
Diameter to connect on the intake pipe : 31 mm
Ref : 2412 39,00 €
CDI works with a standard but recommended with CDI microprocessor
More power than a stator with light output
Ref : 2329 33,00 €
47mm bore with pin diameter of 13mm
Piston provided with rings, pin, clips
Suitable :
147FMF
Ref : 2399 19,90 € Inside diameter of the hole in the head = 63mm 72mm diameter OD Lifan 147FMF 152FMH 1P52FMH 1P47FMF 1P52FMF 1P52FMI-K 154FMI-2 Ref : 1225 Not Available 16,00 € To use with 5 coils Can't works in place of flywheel with a round sensor Ref : 224 16,00 € With round bump sensor Use only with the stators 2 coils Is not appropriate for the stators 6 coils usded on the 140 Lifan and on most of Lifan engine since 2009 Ref : 659 8,00 € For the horizontal cylinder engines (except YX150-1P60FMJ) is the wheel that is on the tensioner arm in the crankcase. Ref : 1543 7,00 €
Bore 52.4mm, 1mm thick
107/110-1P52FMH
125-1P52FMI-K
Ref : 2665 6,00 €
An attached aluminum one for the drain plug and one screw tensioner chain. Ref : 176 3,00 €
Common to all engines and includes the deck seal plugs and 2 small rings, which are at the screw behind the plate. Ref : 3395 3,00 €
height 5.60mm for valve tail diameter 5 mm Any horizontal except 150/160 YX-GPX engine Ref : 302 3,00 €
Diameter of the valve stem 5mm Ref : 430 1,00 €
An attached aluminum one for the drain plug and one screw tensioner chain. |



Engine parts
Engine




All the Dirt bike, motorcycles, cross.