All parts of Pit Bikes
Ex : Lifan, LXR, Pignon, ...
My Cart
No items

?
englishfrench
My Account
News
Contact Us
Contacter Nous
Flash Sales
Ongoing

9
 
  Shop >> Frame parts

Frame parts


Under the  dirt bike word it distinguish between two families : the pit bike and dirt bike

Pit bikes are rather small bikes with 10, 12 or 14 inch diameter rear wheels.

You differentiates the smallest with a swinging arm in the shape of triangle that is named "cantilever"

Dirt bike are rather bigger bike with 17 to 18" rear wheels

 

 

 

Seat

Seat cover

The minimum quality is the chromolybden steel. Handlebars must resist in fall but to don't break.

The good compromise is aluminum  7000 serie. They have received a heat treatment that allows them to bend and regain their shape.

The leader in dirt bike handlebar is Neken a french factory in our city Angers !

The Renthal Twin Wall with its two layers seemed to be able to provide even greater security. Unforntnaly the rider prefer the comfort from the Neken and it seem it will stay also the most stronger !

The brand is not the most important for the quality. What is important is the material used. A lot of brands use the advertisement to be famous and use a low alumium 2000 series that is just good, no more !

 

260mm-> used on a cantilever type suspensions pitbike (inclined +/-45°)

270mm -> YCF START 125-S 2014 and PILOT 2015

275 mm-> Pitsterpro X4, X5, X6, MX and to grow up the YCF 2015

285mm-> to enhance a pitbike in shock 275mm. On balance going down the tubes of forks in the triple clamp

290 mm-> idem above

300 mm-> Apollo AGB29

310mm-> YCF START F125 2014, PILOT 2013, 2014 -> can easily be replaced by a 315mm

315 mm-> BUCCI BR1-F6 and F15

330 mm-> YCF FACTORY SP1, SP2, SP3 2012, 2013, 2014 and 2015

356 mm-> PITSTERPRO LXR UPower

360 mm-> Apollo / Kayo

 

The plastics set, seat and tank are identified by the name of the original model that inspires their forms.

In this topic you will find parts for pit bike Apollo ZheJiang AGB27 form

Look at the shape of the tank sides, easy to make the difference with the other models to dirt bike

The plastics set, seat and tank are identified by the name of the original model that inspires their forms.

In this topic you will find parts for pit bike Honda CRF50 form

Look at the shape of the tank sides, easy to make the difference with the other models to dirt bike

The plastics set, seat and tank are identified by the name of the original model that inspires their forms.

In this topic you will find parts for pit bike HONDA CRF70 form

Look at the shape of the tank sides, easy to make the difference with the other models to dirt bike

The stickers form are identified by the name of the original dirt bike model that inspires their forms.

In this section you will find form pit bike KAWASAKI KLX110 (2001 à 2009)

Look at the shape of the tank sides, there is no many risk to make a mistake with the other dirt bike models

The plastics set, seat and tank are identified by the name of the original model that inspires their forms.

In this topic you will find parts for pit bike form YAMAHA TTR110 and CRF70 (ftont plate and front fender)

Look at the shape of the tank sides, easy to make the difference with the other models to dirt bike

Decals = stickers set

To easily setup start to let's clean the plastics. Then heat slightly with a hair dryer or with a heat gun on the side inside.

The better temperature for stickers and support is  20 / 25°. You will apply a film of soapy water on the face a paste. This will facilitate the positioning on the cover.

When the sticker is perfectly in place, a shot of hot air heat will help to apply the more rounded forms.

Reference 3917 to see how to purge a brake set easily

Sealed ball bearings 2ZZ = ball bearings with metal flange. 2RS means 2 seal face Rubber that very better

needle, tapered roller bearing for the steering column, gearbox bearing, crankshaft bearing.

  <<    <    >    >> Page