Outlets

Front wheel  Bucci F4-F6-F15 et F15R

Black rim, red hub

upper (Ø46mm) and low triple clamp (Ø52 mm) for Tech fork diameters
2 handlebar clamps both positions for 28.6mm handlebar
Steering axle for LXR frame all years

With handlebar clamp, steering axes and screws.

Fixation for KLX110 front fender (Bucci F6)

Rear sub frame for LXR with CRF 110 plastic kit all years. 

Only sub frame, without bolts and brakets. 

Billet cover then anodized

Laser marked UPower

provided with its o-ring seal

Swing arm for 14" rear wheel

Fit on all LXR and X6 with linkage

TB cylinder ref TBW0156 Bore 52mm, height 62.8mm cylinder Ø outside the shirt collar 54mm and length 24mm. For CRF stud position.

For 190 mm brake disc

can be fit on most pitbike

Countershaft + mainshaft set

For engine TK152FMH from D150 0001 to D150 0999

First shaft ø13.3 mm // ø17mm

Second shaft ø17mm // ø14 mm

Full needle bearing

Fit on all the LXR from all year

Brake hose for racing dirt bike LXR88 and MX110
Set with 2 connections for 10mm screw
Length pitch fittings 1000mm
Color grey Hose
Made in France

Moto cross bike stand Neken made in France. 

Discount on stock only ! 

Fit for Factory LXR rear shock for the riders looking for more motricity 

It need in any case for the riders less than 120 Lbs

-

Assignment

YX 149 type 1P56FMJ-5 with kick shaft 16 mm

Naked carter without cap or window oil level

Window level oil reference 3293

-

Ø12 Ø 17mm lenght 113.5 mm 

23/26/29/34 teeth

to leave the sprocket of 3 mm allowing to use the wheels of years past on the new models 2014

Brake pedal for LXR and LXR-R. Provided with the bearings

New design 2013 suitable on any years

Tail diameter 4.45 mm

32 spokes for 12'' for front rim RED ONE

32 spokes for rear wheel Red One hub LXR provided without nuts

-

diameter air filter connecting = 34m

Fit on:

22 teeth

gasket paper to the crankcase reference 4430

Hard plastic
with two holes to 45mm for attachment on any support

For tank diameter 50mm

New full alloy oil cleanner, stronger than steel/alloy parts.

The aluminum oil cleaner saves significant inertia, the engine is give rpm quickly

Bigger threads in the crankcase. Less breakage and ability to fit this part in case of thread destroyed after a fall

Inside diameter 10mm

Provided with two sealed ball bearings

Assignment:
All the Marzocchi 35mm style forks fitted on YCF, RSR, BIDALOT, PITPRO, MOTOVERT, TRADING EXD

Valve cap with a hose to connect a breather.
Reduce the pressure into the engine.
Provided with the O ring.

Idle screw for PE 28 UPower without spring. (Caution does not fit on Keihin PE28 Daytona)

CRF 110 Black plastics set 

Round handlebar foam MX110 PITSTERPRO.

 tools for pit bike. 

Diameter of corrugating tree = 13.30mm

1 euro sale limited offer for one piece for each order

Stop screw in the swing arm to position the bracket on the back of the LXR 2013/2014 caliper Nissin style

Length total 23.5 mm

Diameter 14.5 mm

For BIKES with full CNC swingarm

For 6 mm screws countersunk head 90 ° (FHC)

AU4G CNC aluminum

15.1mm internal diameter, outside 22mm

Length 22 mm

For LXR and X6.
Mount the screws with glue.

For pit and dirt bike gas cap

check the position of the studs on the top engine 88/107 or 125/140 on the view of the head gasket on this site

With the hole for the oil filter on the left crankcase

To improve the quality of your filtration foam Chinese or put on a cone type filter?

Inside diameter expandable from around 80mm

To improve the quality of your filtration foam Chinese or put on a cone type filter?

Inside diameter expandable from around 80mm

For muffler LXR 2014

1 euro sale offer limited one piece for each order

Fixing distance 22mm =  standard protections fork mounting type Marzocchi/Staggs/zhenling

2 bearings per pedal brake LXR

Pit and dirt bike tank cap

connecting 6 mm for 5 mm inside hose fitting

Maximum width of the footrest support = 35mm.
Delivered axis, with washer and pin.

Not suitable for engines YX since the reinforcement of the crankcase (around 2009)

Not suitable for TOKAWA 150/160

-

for piston pin 13mm

Centering cylinder head and cylinder pin for 8 mm stud