New LXR150 2013 : New plastic set, newKeihin PE26 carburetor, new needle bearing on link, new triple clamp shorter, new swingarm, etc...
Engine:
149 UPOWER
Power ISO 15.5hp with the maximum torque at mid rpm
Single overhead cam head
Valves 27 and 23mm
Carburetor: Keihin PE26
Aluminum piston and cylinder
Ignition CDI microprocessor and mini flywheel
Gearbox N1234
5-disc clutch
Frame double A with swingarm outside + cradlemount (3 fixing points of the engine)
rear suspension CNC by linkage mounted on needle bearing
Rear shock, pré load adjustable, wheel travel 190mm
New front fork, 190mm travel
CNC aluminum triple clamps with adjustable offset reduced for maximum maniability
12/14'' wheels with tires Guangli
Wide steel footrests, SPX profiles closer to the framework for more speed turn
Front brake caliper pistons by two large floating. 190 and 220mm discs
Brake pedal passing over the bar foot rests
Secondary transmission: 14x41, chain 420
Brake lever and clutch forged alloy Pitster Pro
Aluminum throttle on bearing
Chromoly steel handlebar 22mm diameter
Plastic set 2013 with long saddle PSTO for max acceleration
Wheelbase: 1200mm -> maximum stability
Seat height: 800mm -> better control
Ground clearance: 290mm
Fork Angle: 25 ° -> handling and stability
Meets EEC
PITSTERPRO Once the majority of Pitsterpro Vegas Mini Sx 2012
Use of this pit bike
 permitted on public roads / Sale prohibited to less than 14 years.
This dirt bike
 should only be used on land specifically adapted and meet safety standards.
Warranty against defects