The colours of the wires are usually to the standard Honda :
Green = ground
Black/Red = out of the engine to the CDI for ignition power
Blue/white = output of the engine to the CDI for the signal time or must do to trigger the ignition
Black/white = output of the CDI to the switch ignition cut-off
Black or yellow/black = output of the CDI to the coil high voltage
Nb coil high voltage must be connected to the mass either by its fixing to the frame or with a green wire
Nb2 the yellow wire from the engine are to be connected to e regulator then to a battery
Nb3 The CDI used for electic starter engine are most of time working on 12v from the battery