150 Pitster Pro LXR HOLESHOT 2S + TCS-FRANCE-CHAMPIONSHIP


 
150 Pitster Pro LXR HOLESHOT 2S + TCS-FRANCE-CHAMPIONSHIP-dirt-bike-store
150 Pitster Pro LXR HOLESHOT 2S + TCS-FRANCE-CHAMPIONSHIP-dirt-bike-store 150 Pitster Pro LXR HOLESHOT 2S + TCS-FRANCE-CHAMPIONSHIP-dirt-bike-store 150 Pitster Pro LXR HOLESHOT 2S + TCS-FRANCE-CHAMPIONSHIP-dirt-bike-store 150 Pitster Pro LXR HOLESHOT 2S + TCS-FRANCE-CHAMPIONSHIP-dirt-bike-store
Part number : 2342
Description : 150 Pitster Pro LXR HOLESHOT 2S + TCS-FRANCE-CHAMPIONSHIP
Not available
0,00 €

Description


The dirt bike LXR Pitbikes are mini dedicated to the race. With the progressive rear suspension rod and the overall feel fine LXR are designed to put you at ease and give you an advantage over those that you find on your favorite track.

 
PITSTERPRO winner in 10 and 12 AM to the famous race of Vegas 2009. A majority of Pitsterpro in Expert category --
rn
Engine:
Single cylinder 4-stroke 150cm3 Holeshot 2S
Bore x Stroke 60 x 53mm
Power: 19cv
Head type KLX worked blower, valves 28 and 23mm
Camshaft very efficient providing both torque and high rpm
Compression increased by modifying the cylinder
Special high compression piston
Ignition type mini driving Daytona (CDI provided)
Clutch UPOWER 5 discs with springs and rubber mountings strengthened
Transmission 4 speed type N1234
Shaft reinforced with dog-clutch
Carburetor Molkt 24

Holeshot engines are engines prepared by U-Power and enjoying the best performance / reliability / price. Our work is as much about performance than reliability. They are engines of competition.
Chassis:
New Double \'Central A\', With 3-point engine mounts. Fixing the swingarm from the outside
Rear Suspension CNC by rod mounted on ball bearings sealed
GPX front fork with adjustable compression and relaxation, travel 185mm
Option fork Marzocchi Shiver + 350euro
Option fork FACTORY 2010 + 150euro
Tees CNC aluminum fork Adjustable
GPX rear shock with dual settings slow relaxation and fast travel to the wheel 200mm
Option 2W + ELKA 300EUR
Emergency rear suspension by three flexible flaps
Wheel 12\'\'14\'\', hubs SPX 7061 CNC aluminum, reinforced aluminum rim
Footrest steel broad profiles SPX
Front brake caliper by two large floating piston. Disks 190 and 220mm
Brake pedal passing over the bar footrest
Double oil cooler with air deflector
Brake and clutch lever CNC folding Pitster Pro
Throttle CNC rolling
Handlebar 28.6mm diameter aluminum 7061-no-bar
New plastic kit with long saddle
Exhaust-94db-TCS
Kit components include: thread lock, jet set, toolset
Wheelbase: 1200mm -> maximum stability
Seat height: 800mm -> better control
Ground clearance: 254mm
Fork Angle: 25 ° -> handling and stability
rn
Warranty against hidden defects.
Pay toll 3x,
5x, 10x or 20x
rn

rn

Calendar 2010:
4 and April 5: Quinssaines (03)
1 and May 2: Uzerche (19)
12 and June 13: Orientation (89)
10 and July 11: MyClass (42)
18 and September 19: Messeix (63)
16 and October 17: Laguepie (82)